Kit for Talaria Sting MX3/MX4/MX5

Plug&Ride Kit for Talaria Sting MX3/MX4/MX5. Up to 30% more power оn standard 60V battery and up to 300% on 72V battery (for MX3/MX4). Installation guide.

On MX3 on stock 60V battery, you will get up to 8kW
On MX4 with Greenway 60V battery up to 12kW
On MX4 with SCUD 60V battery up to 8kW
On MX5 with Greenway 72V battery up to 15,2kW
On MX5 with SCUD 72V battery up to (test)

Сonnection to the standard wiring instead of the factory controller. All systems (kickstand, fall sensor, throttle, and key) will work. Headlights, brake light, and turn signals on road versions also will work. You can use the switch on the right side to set it up different power modes. The Talaria factory display replace by our On-Board Computer.

In the kit:

• Nucular controller P24F with firmware for Talaria.
• On-board computer with a mount for fork stem.
• CAN-wire 120 cm (47.2 inch) for On-board computer.
• Wiring with connectors for connecting to Talaria.
• Plastic adapter for mounting with bolts.

In stock.

Attention!
The firmware for a standard 60V battery is installed on the controller. If you have a more powerful battery, you need to change its settings in the Controller > Battery section and set other power modes in the Controller > Control Modes menu.

We also recommend adding the Universal thumb lever for regen (NUCTHR) to the kit.